Evapo-Rust™ - a few facts
- Comes ready to use (no dilution)
- Replace evaporative loss with high quality water (RO water)
- 1 gallon derusts approx. 300 pounds of moderately rusted steel
- Removes even heavy rust completely
- Will not remove rust stains from plastic or cloth
- Generally we use 15" of Evapo-Rust™ in the AG tank which equates to approx. 100 gallons - that is enough to derust 30,000 lbs of moderately rusted steel and we have derusted as much as 42,000 lbs with one bath
- Works at room temp
- Works quicker with heat (120-130F)
- Works quicker with ultrasonics
- Parts should be free of dirt, oil, and grease before derusting (helps prolong bath life)
- Does not cause hydrogen embrittlement (rust removal with acid does)
- Depth of rust determines immersion time required
- Non-toxic, non-corrosive, safe on skin
- No fumes or bad odors, non-flammable, no VOC's
- Biodegradable, water soluble
- No acids, bases, solvents or other toxic ingredients
- Will not harm unrusted steel, safe on other metals
- Can be disposed of safely into sewer (check local regs)
- Will not affect plastic, PVC, Viton and most paints
- Will remove oxide type finishes (ex. blueing, browning, etc.)