Midbrook

Features:

• 390-gallon wash tank constructed of 3/16” plate steel.
• 14 and 10 gauge mild steel hoods.
• 24” ID stainless steel, perforated 11 gauge drum with 2” flights.
• 4’0” wash stage with swell for enhanced cleaning.
• 2’0” blow-off stage equipped with 10hp regenerative blower.
• 2.0hp Gusher wash pump.
• Gas heat.
• Sound reducing enclosure for 10hp regenerative blower.
• Overall length: 10’6”, overall width: 7’6”, overall height: 8’6” with 17” base riser.
• Load height: 66” with riser, unload height: 45”
• Easily accessible circular clean-out door.
• Price to include system rebuild according to standard Midbrook Model 250 specifications

Features:

• Stage Lengths: 8’ Wash, 5’ Rinse
• Single Strand Monorail Chain
• Guide Monorail Fixtures
• Variable Speed AC Motor/Gearbox
• Leveling pads
• Conveyor Drip Pan
• Tube Axial Fan
• Stainless steel tank and hood construction
• Rectangular cleanout doors (wash, rinse)
• 1/4 Turn Disconnect, SS Vee-jet Side Nozzles
• Multi-Level Float Switches
• Single particulate filtration
• Extractor X-3 Oil Removal System
• Natural gas heat system
• Gas Dryer
• Allen Bradley PLC
• 460 Voltage, 60 Hertz, 3 Phase
• Dirty Filter Pressure Switch
• 20 HP Regenerative blower
• 85 dba

Features:

• Stainless steel support conveyor bed to support 1”x1” galvanized flatwire belt driven by cast iron sprockets and DC drive motor.
• Black iron plumbing with stainless steel v-jet spray nozzles for complete spray cleaning coverage.
• Natural gas burner, 1 million BTU, with black iron immersion tube capable of heating both fluid tanks during operation.
• Clayton valve automatic water make up system in each tank.
• Vertical barrel mount pump for both fluid stages.
• Tube Axial fan blower with 15 HP motor to generate air flow for blow off stage.
• (2) 450 gallon insulated mild steel tanks.
• Heavy-gauge insulated mild steel hoods.
• Integrated 4” tall mild steel containment pan.
• A total of five (5) marine-style clean-out doors to facilitate easy maintenance.
• (2) Integrated chip-removal baskets.
• 24” diameter steam exhaust fan.

Dimensions:

• Overall length: 17’4”
• Overall width: 7’1”
• Overall height: 7’0”.
• Load / Unload Height: 42”.

Features:

• Stage Lengths: 3’ Load, 12’ Wash, 8’ Blow-off, 2’ Unload
• Overall Width: 78”
• Overall Height: 96”
• Work Envelope: 2 lanes @ 12” W x 54” H ; 1 lane @ 10” W x 54” H
• Load/Unload Height: 38”
• 1” x 1” Galvanized Belt
• Galvanized Rollers
• Skid plate at load and unload ends
• Three lanes overall
• Guide Rails
• 1” Stainless Steel Insulation Skin
• Containment Pan
• Conveyor Drip Pan
• Torque limiter
• Stainless steel tank construction
• Mild steel hood construction
• 3 Lift Off Access Doors per side, one for access to wash headers, one for blowoff headers, and one in the middle where guide rail sections meet
• Power Exhaust & Vents
• 2 Rectangular cleanout doors (wash)
• 2 Vertical Barrel Mount Wash pumps – 30- 40 PSI at 150 GPM
• Black iron piping
• Plastic Clip-on Quick Disconnect Nozzles
• Cla-Valve w/ Strainer
• Duplex particulate filtration
• 2 Extractor X-3 Oil Removal Systems
• Gas heat system
• Allen Bradley PLC
• 440/480 Voltage, 60 Hertz, 3 Phase
• Solution Low Level Switch
• Solution High Level Switch
• Dirty Filter Pressure Switch
• 6 Regenerative blowers – 25 HP
• 85 dba
• Stainless Steel Manifold Construction

Features:

• Stage Lengths: 3’ Load, 8’ Wash, 4’ Rinse, 6’ Blow-off, 3’ Unload
• Overall Width: 56”
• Overall Height: 60”
• Work Envelope: 36” W x 12” H
• 1” x 1” heavy duty stainless steel flatwire conveyor belt.
• Leveling pads
• Torque limiter
• Stainless steel tank and hood construction
• Marine cleanout doors (wash, rinse)
• Wash pump – Gusher 5HP, 40 PSI at 150 GPM
• Rinse pump – Gusher 5HP, 40 PSI at 70 GPM
• Stainless steel piping
• Stainless steel sump pump
• Automatic water make-up
• Solution counterflow
• Single particulate filtration with monitor tied to PLC
• Suparator® Thin Film Oil Removal System
• Gas solution heat system
• Allen Bradley SLC 5/03 PLC
• Safety door switches
• Centrifugal blower; electric heat
• Power exhaust and vent

Features:

• Stage Lengths: 2’ Load, 4’ Wash, 6’ Ultra, 4’ Rinse, 4’ Blow-off, 2’ Unload
• Overall Width: 72”
• Overall Height: 60”
• Work Envelope: 24” W x 10” H
• Load/Unload Height: 42”
• Dual Strand Chain
• Variable Speed DC Motor/Gearbox
• Leveling pads
• 2” Stainless Steel Insulation Skin
• Conveyor Drip Pan
• Mist Collector
• Torque limiter
• Stainless steel tank and hood construction
• Circular cleanout doors (wash, rinse, ultrasonics)
• Wash pump – 30- 40 PSI at 60-80 GPM
• Rinse pump – 30-40 PSI at 60-80 GPM
• Stainless steel piping
• Plastic Quick Fit Nozzles
• Multi-Level Float Switches
• Single particulate filtration
• Extractor X-3 Oil Removal System
• Electric heat system
• IEC Controls
• 480 Voltage, 60 Hertz, 3 Phase
• Dirty Filter Pressure Switch
• 20 HP Regenerative blower
• 85 dba

Features:

• Built in 2004
• Stage Lengths: 1’ Load, 2’ Wash, 2’ Rinse, 1’ Unload
• Work Envelope: 6” W x 12” H
• Single Strand Chain
• Variable Speed DC Motor/Gearbox
• Torque Limiter
• Conveyor Drip Pan
• Tube Axial Fan
• Stainless steel tank and hood construction
• Circular cleanout doors (wash)
• Gull Wing Access Door
• “Hydra-Cell” rotary diaphragm pump, 1500 PSI
• Black Iron Pipe
• Electric heat system
• Push Button Relay Logic
• 440/480 Voltage, 60 Hertz, 3 Phase
• High-velocity pressure blower
• 85 dba

Features:

• System footprint: 9’ High x 5’ Wide x 9’ Deep
• 30” wide turntable
• 36” load height
• Stainless steel construction
• Single vertical door
• 50 psi wash pump in 125 gallon wash tank
• 40 psi rinse pump in 60 gallon rinse tank
• Automatic water make up system in each tank
• 10 hp 300 cfm regenerative blower
• Stainless steel plumbing
• Particulate filtration in wash and rinse tank
• (4) 12kw heater elements in wash tank
• (2) 12 kw heater elements in rinse tank
• Maximum load capacity of 1900 pounds

Features:

• Built in 2004
• Stage Lengths: 1’ Load, 4’ Blow-off, 4’ Rust Proof, 6’ Blow-off, 1” Dwell, 2’ Cool Down, 1’ Unload
• Load/Unload Height: 34”
• Work Envelope: 18” x 4”
• Standard Duty, Stainless Steel, Flatwire Belt
• Galvanized Rollers
• Variable Speed DC Motor/Speed Reducer
• Gearbox Sight Gauge
• Torque Limiter
• Conveyor Drip Pan
• Tube Axial Fan
• Stainless steel tank and hood construction
• 1” Stainless steel exterior insulation
• Standard Lift Off Access Door
• Black Iron Pipe
• Atomizing nozzles
• Chip sucker filtration
• Electric heat system
• Two 15 HP Centrifugal Blowers
• Total Control Quick Panel Series Micrologix
• 440/480 Voltage, 60 Hertz, 3 Phase
• 80 dba
• 7 Ton, 2000 CFM Chiller
• Low level solution switch in Rust Proof Tank
• Lexan Protective Covers
• Pneumatics

Features:

• 1 HP Double Reduction Speed Reducer
• Marine doors
• Heavy Duty Access Doors
• 1/4 High Pressure, SS Vee-jet Nozzles
• Float Switch
• Filtration
• 480 Voltage, 60 Hertz, 3 Phase
• Pressure Gauges
• Regenerative blower
• Exhaust Fan
• 60 HP High Pressure Wash Pump
• 15 HP All Iron, Vertical “Top Pull-Out” Design, Barrel Mount Pump, 50 GPM at 60 PSI
• Heat Exchanger
• Moisture Eliminator

Features:

• Rectangular Clean Out Door
• Drain Valve
• Reservoir Volume, 126 Gallons
• Solution Level Control
• Automatic Water Make Up
• Solution Low Level Detection
• Solution Pump, 3 HP 30psi @ 60gpm
• Plumbing, Black Pipe
• Wash Headers
• Solution Nozzles, Vee-Spray
• Filtration, Removable Basket
• Blower, 7.5 HP Regenerative
• Blow-Off Headers
• Required voltage, 480 VAC, 60 Hz
• Hour Meter
• Operator Interface, Push Buttons
• Relay Logic Controls

Featues:

• Dimensions: Width 8.5’, Depth 5.5’, Height 8’, Weight Empty 4,630 pounds
• Central treatment chamber, stainless steel, thermally insulated, vacuum tight
• Hermetically (air tight) sealed automatic sliding door with safety lock
• Gear motor driven by electronic inverter
• Exterior steam heating system
• 2 stainless steel tanks used for pre-cleaning, washing
• Stainless steel plumbing with stainless steel junctions
• Double distillation system, stainless steel thermally insulated
• Double water-separator, stainless steel
• Swarf filtering unit, flat bottom
• 25 micron filter cartridge screen
• PLC
• Drying circuit
• Ecosystem and automatic system for oil evacuation from still

Features:

• Ideal for crankshafts and differentials
• Integrated parts loader (2 station)
• Hot water soluble detergent spray
• Air dry cycle
• Rocking motion during wash & dry
• 400L (106 Gallons) Tank
• Mitsubishi Q PLC
• Light curtain
• Oil Skimmer
• Visual Signal Tower
• Parts counters
• Stainless steel, first class machine
• Showa exhaust system
• 2,200 lbs, 6' w x 9' h
• Part Wash Envelope: 26" w x 28" d x 14" h
• Part loader for 26" w x 10" h opening
• Built to Toyota Japan specifications