Cyclone Commercial Cleaning System

  • Belt Conveyor

    Overall System Dimensions:140"L x 61"W x 80"H

    Stage Lengths:13" Load, 60" Wash, 18" Transfer,
    36" Blow-off, 13" Unload

    Load Height:38"
    Unload Height:38"

    Features Include:

    • 1" x 1" x 18" wide galvanized flatwire belt
    • Conveyor slide bed
    • Tension adjustable conveyor belt
    • 5 FPM fixed belt speed
    • Rectangular tank cleanout door
    • Reservoir volume - 100 gallons
    • Solution level control
    • Automatic water make-up
    • Solution low level detection
    • Solution pump - 3HP, 30PSI at 60 GPM
    • Black iron plumbing
    • 360° coverage wash headers
    • Vee-spray solution nozzles
    • Removable basket filtration
    • 7.5HP Regenerative blower
    • 360° coverage blow-off headers
    • 480 volt / 60 hertz
    • Relay logic controls
    • Push button operator interface

    Integrated Fluid / Blow-off Module Pricing (One Drive & One Panel):

    Available Options:

    • Single Canister Filtration
    • Electric Solution Heat (Adjustable to 160°F)
    • Caster Cart (Adds 2-6" to overall height depending on configuration)
    • Variable Speed Material Handling
  • Agitation Tank System

    Overall System Dimensions:45"L x 53"W x 80"H
    Table Dimensions:39"L x 31"W
    Load / Unload Height: 40"

    Features Include:

    • Solution level - 20" (above tank bottom)
    • Cycles per minute - 2 to 60
    • Cylinder stroke - 2" to 28"
    • 12 gauge stainless steel construction
    • Tank drain valve
    • Reservoir volume - 120 gallons
    • Solution low level detection
    • Electric solution heat
    • Load capacity - 250 lbs.
    • 480 volt / 60 hertz
    • Push button operator interface
    • PLC controlled
    • Required air pressure - 65 PSI

    Available Options:

    • Canister Filter
    • Automatic Water Make-up
  • Cabinet Systems

    Overall System Dimensions :99"L x 66"W x 96"H
    Cabinet System Load Access: Full
    Indexing System Load Opening: 24"W x 30"H
    Load / Unload Height: 42"

    Features Include:

    • 48" Diameter
    • Continuous Rotation
    • Variable speed drive, 1-8 RPM
    • Drive tension adjustable
    • Open table or part nests
    • Circular tank cleanout door
    • Drain port
    • Solution level control
    • Automatic water make-up
    • Solution low level detection
    • Solution pump - 7.5HP
    • Black iron plumbing external
    • Stainless steel plumbing internal
    • Electric solution heat - 135°F ± 10°F
    • Single canister filtration
    • Wash headers
    • Vee-spray solution nozzles
    • Removable basket filtration
    • 15HP regenerative blower
    • Blow-off headers
    • Exhaust fan
    • 480 volt / 60 hertz
    • Operator interface - touch screen
    • PLC
    • 800 lb. capacity

    Available Options:

    • Indexing (8-station) with part nest and
      single station access
    • Solution level insulation
    • Oil removal system
  • Rotary Drum System
    Construction: Mild or Stainless Steel
    Rectangular Clean Out Door
    Drain Valve
    Reservoir Volume: 126 Gallons
    Solution Level Control
    Automatic Water Makeup
    Solution Low Level Detection
    Solution Pump: 3HP 30PSI @ 60GPM
    Plumbing: Black Pipe
    Wash Headers
    Solution Nozzles: Vee-Spray
    Filtration: Removable Basket
    Blower: 7.5HP Regenerative
    Blow-Off Headers
    Required Voltage: 480 VAC, 60 Hz,
    Hour Meter
    Operator Interface: Push Buttons
    Relay Logic Controls
    Agitation Table
    12" Diameter Drum
    1/4" Perforation
    2.5 Flight Height x 7" Pitch
    Speed 5 RPM Fixed
    System Dimensions
    SYSTEM OVER ALL: 121 " L x 61 " W x 70 " H
    LOAD HEIGHT: 42" UNLOAD HEIGHT: 26 "
    STAGE LENGTHS: 12" Load, 60" Wash, 36" Blow-Off, 13" Unload
    Options
    Single canister filtration with replaceable polyester bag
    Electric solution heat, adjustable to 135 degrees F +/- 10 degrees F
    Start up and training
    Variable speed material handling
    Caster Cart

The Midbrook Cyclone line offers an alternative for companies in the market for a parts washer, but without the time or budget to obtain a customized parts washer. The Cyclone parts washers feature standard conveyor or rotary drum parts washers with wash and blow off modules that can be linked for flexibility and to achieve process requirements. A standard Cyclone parts washer can be purchased for a fraction of the Hurricane parts washer cost and you will still be supported by Midbrook’s on-site service technicians, spare and replacement parts services, and the Midbrook Technology Center. The Cyclone ensures that any company can obtain a parts washer if it is required by their process.